Bone Glue, Veneer Paper, Sanding block, Glue Scraper
We recommend our high quality traditional bone glue for fine wood work. Its advantages are many but first and foremost are the strength of the bond, reversibility (heat applied to a joint will soften the glue), and it is non-toxic.
Wood requires a surface treatment in many cases. This has on one hand an aesthetic function (gloss, color) and a protective function (against water, sweat and mechanical influences). There is an enormous variety of different products on the market, but we favor the simple, time tested traditional products for most applications.
Bone Glue
Bone glue, made of animal bones, as the name suggests, was in general use among cabinetmakers for centuries. Read about the advantages of bone glue and how to use!
Bone Glue 100 g
For small demands!
Order nr. 109007
Price € 2.20
Bone Glue 1000 g
Order nr. 109008
Price € 6.70
Bone glue, made of animal bones, as the name suggests, was in general use among cabinetmakers for centuries. Read about the advantages of bone glue and how to use!
Bone Glue 100 g
For small demands!
Order nr. 109007
Price € 2.20
Bone Glue 1000 g
Order nr. 109008
Price € 6.70
Veneer Tape
Used to hold veneers together before gluing to prevent slippage. Made of white bleached Kraft paper 40 g/sqm, extremely tear resistent. For light coloured veneers, also suitable for veneers thicker than 0.6 mm. The gumming is free of grease and acids, avoiding therefore spotformation and discolouration.
Veneer Tape unperforated
Standard use, if paper is removed after veneering.
Roll 200 m (600 ft.), 20 mm (3/4 in.) wide.
white, unperforated
Order nr. 303047
Price € 6.95
Veneer Tape perforated, 2 rows of holes
Perforated tapes are used specially for the application between veneer and carrier material.
Roll 200 m (600 ft.), 20 mm (3/4 in.) wide.
white, perforated
Order nr. 303048
Price € 7.95
Used to hold veneers together before gluing to prevent slippage. Made of white bleached Kraft paper 40 g/sqm, extremely tear resistent. For light coloured veneers, also suitable for veneers thicker than 0.6 mm. The gumming is free of grease and acids, avoiding therefore spotformation and discolouration.
Veneer Tape unperforated
Standard use, if paper is removed after veneering.
Roll 200 m (600 ft.), 20 mm (3/4 in.) wide.
white, unperforated
Order nr. 303047
Price € 6.95
Veneer Tape perforated, 2 rows of holes
Perforated tapes are used specially for the application between veneer and carrier material.
Roll 200 m (600 ft.), 20 mm (3/4 in.) wide.
white, perforated
Order nr. 303048
Price € 7.95
VERITAS Sanding Block
This sanding block is sized to make use of an entire 230 x 280 mm (9 in. x 11 in.) standard sanding sheet, which will be divided into 6 pieces. The size of the sole of this sanding block is 100 x 75 mm (4 in. x 3 in.). The clamping knob draws the paper tight as it is loaded. The ergonomic shape of the maple handle is for comfort in your hand. It is a pleasure to work with this tool.
Order nr. 307992
Price € 29.90
This sanding block is sized to make use of an entire 230 x 280 mm (9 in. x 11 in.) standard sanding sheet, which will be divided into 6 pieces. The size of the sole of this sanding block is 100 x 75 mm (4 in. x 3 in.). The clamping knob draws the paper tight as it is loaded. The ergonomic shape of the maple handle is for comfort in your hand. It is a pleasure to work with this tool.
Order nr. 307992
Price € 29.90
KUNZ heavy glue and paint scraper
With exchangeable blade and cutting edge on two sides, with cast iron handle. Width of cutting edge 55 mm, Length 32 cm.
Order nr. 301646
Price € 24.00
With exchangeable blade and cutting edge on two sides, with cast iron handle. Width of cutting edge 55 mm, Length 32 cm.
Order nr. 301646
Price € 24.00
VERITAS Ball Joint Scraper with Carbon Steel Blade
For any major scraping work, nothing beats a ball-joint scraper. The handle can be set anywhere in a 70° cone, allowing a comfortable grip and effective blade orientation in virtually any circumstance. The handle unlocks or locks solidly with a quarter turn. Another advance on its predecessors is the hand rest on the blade. Substantial pressure can be applied to speed work. Made by Veritas! Enlargement and instructions!
A Scraper with carbon steel blade is used for finishing bare wood surfaces where maintenance of a finely formed edge is more significant. The 75mm x 75mm x 1.6mm (3 in. x 3 in. x 1/16 in.) blade comes with one edge bevelled. You may wish to bevel one or more others, but it also works perfectly well treated as a heavy-duty cabinet scraper with square, burnished edges.
Order nr. 307940
Price € 47.50
Replacement Blade
Order nr. 307941
Price € 11.50
For any major scraping work, nothing beats a ball-joint scraper. The handle can be set anywhere in a 70° cone, allowing a comfortable grip and effective blade orientation in virtually any circumstance. The handle unlocks or locks solidly with a quarter turn. Another advance on its predecessors is the hand rest on the blade. Substantial pressure can be applied to speed work. Made by Veritas! Enlargement and instructions!
A Scraper with carbon steel blade is used for finishing bare wood surfaces where maintenance of a finely formed edge is more significant. The 75mm x 75mm x 1.6mm (3 in. x 3 in. x 1/16 in.) blade comes with one edge bevelled. You may wish to bevel one or more others, but it also works perfectly well treated as a heavy-duty cabinet scraper with square, burnished edges.
Order nr. 307940
Price € 47.50
Replacement Blade
Order nr. 307941
Price € 11.50
VERITAS Ball Joint Scraper with Carbide Blade
As above, but with carbide blade.
Carbide-blade style is preferred for paint scraping. The 51 mm (2 in.) long carbide blade requires a specially designed holder and both edges can be used.
Order nr. 307942
Price € 51.50
Carbide Replacement Blade
Order nr. 307943
Price € 11.50
As above, but with carbide blade.
Carbide-blade style is preferred for paint scraping. The 51 mm (2 in.) long carbide blade requires a specially designed holder and both edges can be used.
Order nr. 307942
Price € 51.50
Carbide Replacement Blade
Order nr. 307943
Price € 11.50
