Klemmsia Clamps, Pro-Grip Clamps

Klemmsia Clamps, Pro-Grip Clamps

Reasonably priced, light, robust and reliable - that's Klemmsia clamps, which have begun to make a name for themselves. You do not have the bother of screwing tight - the cam lever is all that is needed to exert the pressure. For most gluing work the pressure exerted is adequate although it will be less from this design than from heavy all steel or malleable iron clamps. When one is trying to glue chairs with round or curved sections, the conventional clamp with padding or such requires ingenuity and even acrobatics. Klemmsia clamps are invaluable for the job. They do not tend to slip off and they do not require any extras.

ProGrip Straight Edge Clamp and Tool Guide is a straight edge and a medium duty woodworking clamp in one handy tool. It can be used as circular saw gide and router guide. It is very useful on the drill press as a fence.

KLEMMSIA Clamps
KLEMMSIA Clamps
  • Speedy clamp with cam lever
  • pressure can be regulated smoothly
  • no pressure marks
  • cork pads prevent slipping
  • tremendous stability - made of white beech with high-polished galvanised steel rods
  • low intrinsic weight
  • reasonably priced, esp. for wide spans to clamp
Clamping example 1
Clamping example 2


Opening Depth Order nr. Price
200 mm 110 mm 302200 cart € 9.60
300 mm 110 mm 302201 cart € 10.50
400 mm 110 mm 302202 cart € 11.30
600 mm 110 mm 302203 cart € 13.30
800 mm 110 mm 302204 cart € 15.50
200 mm 150 mm 302205 cart € 14.30
200 mm 200 mm 302206 cart € 15.30
1000 mm 110 mm 302207 cart € 18.80
1200 mm 110 mm 302208 cart € 21.50
Klemmsia Edge Clamp
Klemmsia Edge Clamp
This edge clamp is useful in conjunction with Klemmsia clamps for gluing or re-gluing edges. It will also stand in if required for the movable end of a clamp
Clamping example
Order nr. 302211 cart
Price € 5.50
Mitre Fittings for clamping picture frames
CORNET Mitre Fittings for clamping picture frames
The CORNET fittings are simply slotted onto the bars of the clamps. The self-adjusting fittings are usable for different sizes of framework and different mitre angles. The joint is not covered during clamping and can be inspected from all sides for careful alignment and adjusting. The price for a pair!
Clamping example
Order nr. 302213 cart
Price € 7.95
ProGrip Straight Edge Clamp
ProGrip Straight Edge Clamp
ProGrip Straight Edge Clamp
Detail
ProGrip Straight Edge Clamp and Tool Guide

ProGrip Straight Edge Clamp and Tool Guide is a straight edge and a medium duty woodworking clamp in one handy tool. It can be used as circular saw gide and router guide. It is very useful on the drill press as a fence.

The low profile jaws (depth only 15 mm) allow you to use the clamp inverted and have an unobstructed area - an ideal tool when used as panel clamp. The locking lever has 3 locking positions. The extruded aluminium profiles are 54 mm wide and 16 mm thick. Includes tape measure with mm and inch graduation.

This clamp comes with built in T-tracks on the top side 12.7 x 2 mm wide to accept accessories.

Operating instructions
Click pictures for enlargements!

Clamping
capacity
Total
length
Jaw
depth
Order
nr.
Price
610 mm
(24 inch)
840 mm 15 mm 300172 cart € 22.90
915 mm
(36 inch)
1140 mm 15 mm 300173 cart € 29.90
1270 mm
(50 inch)
1500 mm 15 mm 300174 cart € 36.90

Item-Nr. 300173 and 300174 we ship by UPS only.

The following large clamp we do not ship and can be picked up only in our shop. Width 129 mm.

Clamping
capacity
Total
length
Jaw
depth
Order
nr.
Price
2667 mm
(105 inch)
2750 mm 15 mm 300175 cart € 89.00
ProGrip Universal Base
ProGrip Universal Base
Turn your ProGrip Guide into a saw guide or router guide with this durable plastic plate, which clips onto all proGrip rails. . You need to drill the appropriate holes to fix the power tool. Read, understand, and follow all manufacturers instructions and guidelines that come with your power tool. Mounting hardware not supplied due to many different power tool types. Recommended for experienced woodworkers only!
Size: 292 x 197 x 6 mm (11-1/2 x 7-3/4 x 1/4 in.)
ProGrip Universal Base with cirular saw and router
ProGrip Clamp not included
Order nr. 300176 In den Warenkorb
Price € 18.90
ProGrip Stop Block
ProGrip Stop Block
This stop block is used in cunjunction with the ProGrip rail for repetitive cuts, stopped cuts, blind cuts. Notice: this stop block has small clearance when fixed to the rail, does not affect accuracy if workpiece is positioned close to the rail.
Size: 127 x 51 x 20 mm (5 x 2 x3/4 in.)
Usable Fence length: 112 mm (4-1/2 in.)
ProGrip Clamp not included
ProGrip Stop Block with router
Order nr. 300177 In den Warenkorb
Price € 9.90
Hold Down
ProGrip Hold Down Kit
This hold down kit made of aluminium holds your stock down on the drill press. Two aluminium stop blocks for repetitive work come with the kit. The stop blocks have slight clearance, does not affect accuracy if workpiece is positioned close to the rail.
Maximum holding height 37 mm
Set supplied as shown on picture
ProGrip Clamp not included
2 Holddowns with bolts
2 Stop blocks
Order nr. 300178 In den Warenkorb
Price € 19.95
ProGrip Wide Jaws
ProGrip Wide Jaws
Enlarge the clamping surface of your ProGrip clamp from 35 x 14 mm (1-3/8 x 9/16 in.) to 105 x 30 mm (4-1/8 x 1-3/16 in.) Very useful to avoid pressure marks. These jaws fit securely on the existing clamp heads with two screws (included). These wide jaws reduce the clamping capacity of the ProGrip clamps at 23 mm.
ProGrip Clamp not included. Price per pair.
Order nr. 300179 In den Warenkorb
Price € 5.95
logo
www.fine-tools.com
Prices include VAT.   Shipping is extra.         99 % in stock!         We ship promptly!
nachoben  |  Homepage  |  Impressum  |  Terms  |  Data protection  |  Contact us  |  Help  |  Instructions  |  Your cart  |  Deutsch  |  Italiano
 
Dieter Schmid - Fine Tools
You are here:   Homepage   →   Clamps   →   Klemmsia Clamps, Pro-Grip Clamps