Incra Rules - High precision marking rules
It looks at first sight just like any other steel rule. But look closer and you see the tiny holes and slits at each graduation, enabling you to make a dot with a pencil or mark a line with accuracy to within a hair’s breadth.
Drawing an accurate line with a conventional ruler is difficult when you are looking from the side, which usually also means inaccurate. INCRA rules solve the problem. The scale, being indented and etched in black, is easy to read. The surface is non-reflecting and enables even tired eyes in poor light to mark the exact start. Select the proper slot or hole, insert a 0.5 mm mechanical pencil, and mark the measurement with dead-on accuracy.
All the rules are only 0.25 mm thick and must, therefore, not be used for coarse work! Taking the right amount of care with this tool, you will not only have pleasure in the finished piece of work but also in doing the drawings. Click pictures for enlargements!
Size 150 x 38 x 0.25 mm
Scale divisions 1/1 mm, 1/4 mm, 1/2 mm, 3/4 mm. Rule in stainless steel, with microfine perforations and angle-marking lines. The scale divisions are etched deeply in black and the graduations read from left to right. Video
Order nr. 304067
Price € 13.50
Precision Marking Rule - mm-graduation
Size 300 x 38 x 0.25 mm
as above, 300 mm long
Order nr. 304068
Price € 21.50
mm-graduation on upper and lower edge
Combined marker rule and protractor with microfine perforations and angle-marking lines, divisions of 1 mm on upper and lower edge. Zero is at the centre. The graduations run to left and right for 150 mm in each case. The protractor has fine slits for drawing the angles, which are in the most useful divisions. Graduations 1/1 mm plus angles. Video
Size 300 x 41 x 0.25 mm
Notice: picture shows inch but we deliver with mm-graduation!
Order nr. 304070
Price € 27.50
mm-graduation at bottom edge
Combined marker rule and protractor with microfine perforations and angle-marking lines, scale divisions etched deeply in black. Angle divisions are in 1/2° and 1/1°. Has an adjustable and removable screw-on stop bar for running along edges. The angles read both from left to right and from right to left - in both cases 0° - 180°/180° - 0° and 0° - 90°/90° - 0°. There is a mm scale along the bottom edge, with zero at the centre and 80 mm running both to left and right. An ideal protractor for many spheres of use! Video
Size 160 x 100 x 0.25 mm
Notice: picture shows inch scale at bottom edge but we deliver with mm-graduation!
Order nr. 304071
Price € 39.50
Combined marker rule and protractor with microfine perforations and angle-marking lines, scale divisions etched deeply in black. Divisions read from left to right. The adjustable and removable screw-on stop bar in lightweight metal is ideal for running along an edge. Detail Video
T-Square Marker Rule - mm graduation
Size 150 x 50 x 0.25 mm
Divisions 1/1, 1/4, 1/2, 3/4 mm
Order nr. 304072
Price € 26.50
T-Square Marker Rule - mm graduation
Size 300 x 50 x 0.25 mm,
Divisions 1/1, 1/4, 1/2, 3/4 mm
Order nr. 304074
Price € 39.50
Combined marker rule and protractor with microfine perforations and angle-marking lines, scale divisions etched deeply in black. Divisions read from left to right. The adjustable and removable screw-on stop bar in lightweight metal is ideal for running along an edge. Detail
T-Square Marker Rule mm and inches combined
Size 6 inch x 76 mm x 0.25 mm,
Divisions 1/64, 2/64, 3/64, 1/32 in.
and 1/1 und 0.5 mm
Order nr. 304073
Price € 31.50
T-Square Marker Rule mm and inches combined
Size 12 inch x 76 mm x 0.25 mm,
Divisions 1/64, 2/64, 3/64, 1/32 in.
and 1/1 und 0.5 mm
Order nr. 304075
Price € 41.50
mm-graduation
The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. Micro-fine marking holes at every scale line allow to instantly locate your sharp pencil point or scribe exactly on target with zero undertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. Video
Notice: picture shows inch graduation but we deliver this bend rule with mm graduation!
Bend Rule Size 150 x 30 x 0.25 mm
Order nr. 304076
Price € 20.50
Bend Rule Size 300 x 30 x 0.25 mm
Order nr. 304077
Price € 27.50
