With the INCRA Jig ULTRA Lite on the router table even the novice woodworker can produce joinery which surpasses that made on even the most expensive dovetail jigs - for a fraction of the cost. Just about any joint is possible - box joints, half blind, sliding, and through dovetails, even INCRA's trademark Double and Double-Double Joints. Notice: templates, table, mounting board not included! For template patterns, we recommend to buy this jig as bundle together with the INCRA Master Reference Guide & Template Library with Metric addendum. Just set the jig to the color coded reference marks and make your cuts. No math, no measurements, and no complicated setups necessary. With INCRA's patented positioning racks there is never any question about your cut being exactly right. If you want to make drawers, craft items, or family heirlooms, the INCRA Jig ULTRA Lite will make your work easier and better than you've every imagined.
INCRA's patented sawtooth racks position your work instantly and automatically in EXACT 1/32 inch (1 mm with Metric version) steps. A micrometer dial fine-tunes your position even more precisely with an incredible 1/1000 inch increment. This is just one of the innovations that make the Ultra so accurate. Even buried in sawdust, the INCRA Jig Ultra continues to operate smoothly, unlike old-fashioned machines that depend on rollers. The racks are made of a polycarbonate durable material.
INCRA's sophisticated Automatic Positioning Control instantly locates each cut to within one or two thousandths of an inch without measuring! The rotating micro adjust scale can be turned under the cursor to establish a zero reference point at any position. Great for zeroing, centering or working with offsets. Keeps track of the distance you've micro adjusted and which way you've gone. Lets you return to your original position with no loss of accuracy.
Dovetails are easy and precise when you combine the included Right Angle Fence with Ultra Lite's precision as shown above. Clamp not included but available on our wooden clamp page.
The INCRA Jig ULTRA Lite has 3 Template Channels. Two of the channels are used for primary (distance from the cutter) and floating (distance from the last cut) reference scales. This leaves another template channel available for additional setups and cutting operations without altering the scale positions.
Notice: Shown dovetail and box template NOT included! Metric version comes with Metric scale instead of shown Imperial scale. Here you find additional sliding scales.
If you want to do joinery with the Ultra Lite Jig we recommend to buy the bundle with template library below!