FAMAG HSS-G Brad-point Drills Series 1594
best quality, milled, with center point, and outlining spurs for clean entry. For softwood, hardwood and all kinds of plywood.
The best you can get!
Made in Germany
Measurements in mm!

Diameter mm	Shaft mm	Total length mm	Spiral length mm	Order nr.	Price
2	2	49	22	304800	✱€ 6.40
2.5	2.5	57	25	304801	✱€ 6.40
3	3	60	33	304802	✱€ 4.90
3.5	3.5	70	39	304803	✱€ 5.20
4	4	75	43	304804	✱€ 5.20
4.5	4.5	80	47	304805	✱€ 5.80
5	5	85	52	304806	✱€ 5.80
5.5	5.5	92	57	304807	✱€ 6.00
6	6	92	57	304808	✱€ 6.00
6.5	6.5	100	63	304809	✱€ 7.10
7	7	108	69	304810	✱€ 7.40
7.5	7.5	108	69	304811	✱€ 8.00
8	8	115	75	304812	✱€ 8.10
8.5	8.5	115	75	304813	✱€ 9.20
9	9	125	81	304814	✱€ 9.50
9.5	9.5	125	81	304815	✱€ 10.70
10	10	130	87	304816	✱€ 10.70
10.5	10.5	130	87	304817	✱€ 13.70
11	11	140	94	304818	✱€ 13.70
11.5	11.5	140	94	304819	✱€ 14.30
12	12	150	101	304820	✱€ 14.90
13	13	150	101	304821	✱€ 15.90
14	13	160	108	304822	✱€ 26.20
15	13	168	114	304823	✱€ 30.80
16	13	176	120	304824	✱€ 32.90
Set of 5 HSS-G Brad-point drills, in wooden box 5, 6, 8, 10, 12 mm				304827	✱€ 49.50
Set of 10 HSS-G Brad-point drills, in wooden box 3, 4, 5, 6, 8, 10, 12, 13, 14, 16 mm				304828	✱€ 105.00
Set of 19 HSS-G Brad-point drills, in plastic case   Picture 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm (1 and 1.5 mm Metal twist drills, Brad point starts with 2 mm)				304826	✱€ 97.00
Set of 5 HSS-G Brad-point drills, in blister package 3, 4, 5, 6, 8 mm				304825	✱€ 25.90

FAMAG HSS-G Brad-point Drills extra long Series 1599
best quality, milled, with deep chip grooves, with center point, 2 main cutters, and 2 outlining spurs for clean entry. You can use almost the entire length of the bit for drilling - the length of the spiral is not the limit, only leaving enough shaft in the drill chuck to hold it firmly. When using the entire length it is recommended to lift the drill in intervalls to allow the chips to eject. For softwood, hardwood and all kinds of plywood. Now available in lengths up to 400 mm! The best drill for precise deep holes.
Measurements in mm!
Enlargement

Diameter mm	Shaft mm	Total length mm	Spiral length mm	Order nr.	Price
3	3	150	100	304960	✱€ 10.30
4	4	150	100	304961	✱€ 11.30
5	5	150	100	304962	✱€ 11.95
6	6	150	100	304963	✱€ 12.70
7	7	150	100	304964	✱€ 16.70
8	8	150	100	304965	✱€ 16.80
9	9	150	100	304966	✱€ 17.60
10	10	150	100	304967	✱€ 19.30
11	11	150	100	304968	✱€ 21.90
Diameter mm	Shaft mm	Total length mm	Spiral length mm	Order nr.	Price
3	3	250	180	304900	✱€ 13.65
4	4	250	180	304901	✱€ 16.10
5	5	250	180	304902	✱€ 18.30
6	6	250	180	304903	✱€ 20.50
7	7	250	180	304904	✱€ 26.50
8	8	250	180	304905	✱€ 26.50
9	9	250	180	304906	✱€ 29.60
10	10	250	180	304910	✱€ 32.20
11	11	250	180	304911	✱€ 37.10
12	12	250	180	304912	✱€ 40.90
13	13	250	180	304913	✱€ 42.00
14	13	250	180	304914	✱€ 45.50
15	13	250	180	304907	✱€ 49.50
16	13	250	180	304908	✱€ 55.90
Diameter mm	Shaft mm	Total length mm	Spiral length mm	Order nr.	Price
3	3	315	250	324601	✱€ 17.20
4	4	315	250	324602	✱€ 20.30
5	5	315	250	324603	✱€ 23.20
6	6	315	250	324604	✱€ 25.90
7	7	315	250	324605	✱€ 33.50
8	8	315	250	324606	✱€ 33.50
9	9	315	250	324607	✱€ 37.30
10	10	315	250	324608	✱€ 40.70
11	11	315	250	324609	✱€ 46.80
12	12	315	250	324610	✱€ 51.60
13	13	315	250	324611	✱€ 54.70
14	13	315	250	324612	✱€ 60.30
15	13	315	250	324613	✱€ 70.10
16	13	315	250	324614	✱€ 81.70
Diameter mm	Shaft mm	Total length mm	Spiral length mm	Order nr.	Price
3	3	400	300	324620	✱€ 22.40
4	4	400	300	324621	✱€ 26.50
5	5	400	300	324622	✱€ 30.10
6	6	400	300	324623	✱€ 33.70
7	7	400	300	324624	✱€ 43.50
8	8	400	300	324625	✱€ 43.50
9	9	400	300	324626	✱€ 48.50
10	10	400	300	324627	✱€ 52.80
11	11	400	300	324628	✱€ 60.80
12	12	400	300	324629	✱€ 67.10
13	13	400	300	324630	✱€ 71.20
14	13	400	300	324631	✱€ 78.30
15	13	400	300	324632	✱€ 91.20
16	13	400	300	324633	✱€ 106.20

FAMAG HSS-G Brad-point Drill Bits Series 1596
with hexagonal shaft 1/4 in. Allows quick change when using a hexagonal chuck
All measurements in mm!

Diameter mm	Shaft mm	Total length mm	Cutting length mm	Order nr.	Price
3.0	6.3 hex (= 1/4 in.)	38	16	304560	✱€ 6.20
3.5	6.3 hex (= 1/4 in.)	40	18	304561	✱€ 6.20
4.0	6.3 hex (= 1/4 in.)	44	20	304562	✱€ 6.20
4.5	6.3 hex (= 1/4 in.)	46	24	304563	✱€ 6.50
5.0	6.3 hex (= 1/4 in.)	50	26	304564	✱€ 6.50
5.5	6.3 hex (= 1/4 in.)	50	26	304565	✱€ 6.90
6.0	6.3 hex (= 1/4 in.)	50	26	304566	✱€ 6.90
6.5	6.3 hex (= 1/4 in.)	50	30	304567	✱€ 6.90
7.0	6.3 hex (= 1/4 in.)	50	30	304568	✱€ 6.90
7.5	6.3 hex (= 1/4 in.)	51	32	304569	✱€ 8.70
8.0	6.3 hex (= 1/4 in.)	51	32	304570	✱€ 8.70
8.5	6.3 hex (= 1/4 in.)	53	33	304571	✱€ 9.40
9.0	6.3 hex (= 1/4 in.)	53	33	304572	✱€ 10.70
9.5	6.3 hex (= 1/4 in.)	54	38	304573	✱€ 10.70
10.0	6.3 hex (= 1/4 in.)	54	38	304574	✱€ 10.70
Set of 9 Brad-point drills HSS-G with hexagonal shaft in wooden box 3, 4, 5, 6, 7, 8, 9, 10 mm and bit holder				304580	✱€ 79.90