logo Dieter Schmid - Fine Tools
Georg-Wilhelm-Str. 7 A - 10711 Berlin - Germany
Tel ++49 (0)30 342 1757 - Fax ++49 (0)30 342 1764
Website: www.fine-tools.com
logo Dieter Schmid - Fine Tools


Georg-Wilhelm-Str. 7 A - 10711 Berlin
Tel ++49 30 342 1757 - Fax ++49 30 342 1764
Website: www.fine-tools.com

 

Overview Planes
Overview Planes


Replacement Blades for Wooden Planes

Replacement Blades for Wooden Planes

Whether you are seeking for replacement blades for your wooden plane or trying to start your own planemaking project, here you are in the right place.

Notice: We cannot guarantee that the blades offered here fit any other planes than those spezified below.

Important note for our US Customers:
As overseas shipping charges are still very high it is not recommended to ship a single blade across the ocean. Shipping costs can be higher than the price of the blade. But we trust it is a good add-on to a plane or saw order. Of course we ship a single blade if you so wish.


Plane blade 48 mm - without chipbreaker

Plane blade 48 mm - without chipbreaker

Dieter Schmid Fine Tools is proud to offer these Hand Planer Blades which have been made exclusively for us in a limited run. These blades are Made in Germany from high alloy, tungsten tool steel specially selected for optimal hardness and an extra fine cutting edge. Each blade is precision laser cut, contour machined to exact specifications, vacuum heat treated and tempered to RC 61 and then carefully ground on automated machinery.

This blade is suitable for alle wooden planes with blade width 48 mm and where the blade is hold by a wedge. You can fit your ECE or ULMIA plane with this blade. Not suitable for wooden planes with blade adjustment!

Enlargement and sizes

Order nr. 300230
Price € 72.50


CAUTION: This Planer Blade is susceptible to rust! Be sure and keep your blade lightly oiled and free from moisture. Protect the cutting edge from damage and use care when resharpening. Never use power machinery to sharpen these blades as heat may destroy the blade's temper. Sharpen by hand! We offer very good honing guides and whetstones. If you have a question, please contact us.

Blade with chipbreaker

Blades with chipbreaker

for all planes that hold the blade with a wedge, i. e. all standard wooden planes. They fit both Ulmia and ECE planes, if the requested width is the same.
  Width   Maker   for:   Order nr.   Price
45 mm ECE some older types 301201 € 25.90
48 mm ECE or TWO CHERRIES Smoother 301023, 301025, 301063, 301065
Doppelhobel 301020, 301022, 301060, 301062
small ECE-jointer 301030
301207 € 25.90
48 mm Ulmia Smoother 300313, 300314
Jack 300309, 300310
300311 € 25.90
54 mm Ulmia Small jointer 300308 300338 € 27.90
60 mm ECE Jointer 301028, 301029 301199 € 33.90
60 mm Ulmia Jointer 300306, 300307 300336 € 33.90

Blades without chipbreaker

Blades without chipbreaker

for all planes that hold the blade with a wedge, i. e. all standard wooden planes. They fit both Ulmia and ECE planes, if the requested width is the same. Take these, if your chipbreaker is still o.k.
  Width   Maker   for:   Order nr.   Price
48 mm ECE or TWO CHERRIES Smoother 301023, 301025, 301063, 301065
Jack 301020, 301022, 301060, 301062
Small ECE-jointer 301030
301215 € 17.30
48 mm Ulmia Smoother 300313, 300314
Jack 300309, 300310
300312 € 17.30
54 mm Ulmia Small jointer 300308 300337 € 18.50
60 mm ECE Jointer 301028, 301029 301299 € 21.50
60 mm Ulmia Jointer 300306, 300307 300335 € 22.00

ECE plane irons with replaceable blades ECE plane irons with replaceable blades

ECE plane irons with replaceable blades

For all those who do not want to sharpen. Fits all planes that hold the blade with a wedge and a blade width of 48 mm.
Comes with chipbreaker and 3 blades!
Width: 48 mm
Order nr. 301208
Price € 44.80


Set of 5 replacement blades
Bestell-Nr.: 301209
Preis: € 19.50

Primus-blades with chipbraker

ECE Primus-blades with chipbraker

and lateral blade adustment for Primus planes.
Notice: These blades fit only ECE Primus planes with blade adjustment.

Width: 48 mm
for:
Primus-Smoother 301003, 301004, 301024, 301067
Primus-Reform-Smoother 301047
Primus-Jack 301001, 301002,
Primus-English Jack 301011, Primus-Small Jointer 301012,
Order nr. 301297
Price € 39.50


Width: 60 mm
for: Primus-Jointer 301009, 301010
Order nr. 301290
Price € 49.50



Primus-blades without chipbreaker

ECE Primus-blades without chipbreaker

for Primus planes, if your chipbreaker is still o.k.
Notice: These blades fit only ECE Primus planes with blade adjustment.

Width: 48 mm
for:
Primus-Smoother 301003, 301004, 301024, 301067
Primus-Reform-Smoother 301047
Primus-Jack 301001, 301002,
Primus-English Jack 301011, Primus-Small Jointer 301012,
Order nr. 301216
Price € 22.60


Width: 60 mm
for: Primus-Rauhbank 301009, 301010
Order nr. 301291
Price € 26.50

Tension screw

Tension screw for Primus planes made by ECE

as on the image with nut, spring and washer.

Lenght: 115 mm
for:
Primus-Smoother 301003, 301004, 301024,
Primus-Reform-Smoother 301047
Order nr. 301296
Price € 35.90


Lenght: 130 mm
for: Primus-Jack 301001, 301002
Order nr. 301293
Price € 45.90

ULMIA Plane blades with chipbreaker for Ulmia-planes with blade adjustment

ULMIA Plane blades with chipbreaker

for Ulmia-Smoother with blade adjustment 300316 and Ulmia-Reform-Smoother with blade adjustment 300318.
Notice: These blades fit only Ulmia planes with blade adjustment.
Width: 48 mm
Order nr. 300319
Price € 37.70

ULMIA Plane blades without chipbreaker for Ulmia-planes with blade adjustment

ULMIA Plane blades without chipbreaker

for Ulmia-Smoother with blade adjustment 300316 and Ulmia-Reform-Smoother with blade adjustment 300318, if your chipbreaker is still o.k.
Width: 48 mm
Order nr. 300572
Price € 21.50

Toothed blade

Toothed blade

Width: 48 mm
Maker: ECE
for: ECE toothed plane 301051 and other wooden toothed planes with same blade width, including Ulmia.     Enlargement
Order nr. 301211
Price € 17.30

Scrub plane blades

Scrub plane blades

Single irons for scrub planes. These blades fit usually the planes of other makers too, if the width is the same. (this does not appear for the Ulmia double iron)

Width: 33 mm
Maker: ECE
for: ECE-Scrub 301050
Order nr. 301210
Price € 15.90


Width: 33 mm
Maker: Ulmia
for: Ulmia-Scrub 300301, 30030
Order nr. 300361
Price € 15.90

Schrupphobeleisen mit Klappe

Scrub plane blade with chip breaker

only for the Ulmia scrub plane with chipbreaker!
Width 33 mm
Order nr. 300362
Price € 26.00

Scrub plane blade without chipbreaker

Scrub plane blade without chipbreaker

only for the Ulmia scrub plane with chipbreaker! Take this, if your chipbreaker is still o.k.
Width: 33 mm
Order nr. 300363
Price € 17.70

Single rebate plane blades

Single rebate plane blades

They fit both Ulmia and ECE planes, if the requested width is the same and fit nearly all wooden rebate planes with blades without chipbreaker.
  Width   Maker   for:   Order nr.   Price
18 mm ECE ECE-rebate plane with single iron 301036 301202 € 12.70
21 mm ECE many rebate planes of this width 301203 € 12.70
24 mm ECE many rebate planes of this width 301204 € 12.70
30 mm ECE ECE-rebate plane with single iron 301035, 301037
ECE-chisel plane 301034
ECE-glazier's rabbet plane 301041
301206 € 12.70

Doppelsimshobeleisen mit Klappe

ECE Rebate plane blade with chipbreaker for rebate planes with double iron

These blades are for rebate planes with double iron. They fit both Ulmia and ECE planes, if the requested width is the same.
Width: 30 mm
for:
ECE-rebate plane with double iron 301038, 301040, 301041
Order nr. 301288
Price € 26.10

Doppelsimshobeleisen ohne Klappe

ECE Rebate plane blades for double iron planes without chipbreaker

Same as above, but without chipbreaker. Buy this, if your chipbreaker is still o.k.
Width: 30 mm
for:
ECE-rebate plane with double iron 301038, 301040, 301041
Order nr. 301294
Price € 17.30

Primus-rebate plane blade with chipbreaker

ECE Primus-rebate plane blade with chipbreaker

They fit only the ECE Primus rebate plane 301008.
Width: 30 mm
Order nr. 301286
Price € 36.50

Primus-rebate plane blade without chipbreaker

ECE Primus-rebate plane blade without chipbreaker

As above, but without chipbreaker. Buy this, if your chipbreaker is still o.k.
Width: 30 mm
Order nr. 301287
Price € 23.10

Blade for ECE block plane

Blade for ECE block plane

Fits only the ECE block plane, comes without chipbreaker
Width: 39 mm
Order nr. 301227
Price € 12.50

Router plane blades

Router plane blades

For Router planes. All our router plane blades fit ECE and Ulmia router planes as well.
  Width   Maker   for:   Order nr.   Price
10 mm Ulmia Ulmia router plane 300347 300458 € 21.00
15 mm Ulmia Ulmia router plane 300347 300459 € 21.00
20 mm Ulmia Ulmia router plane 300347 300460 € 21.00
Set of 3
10 mm
15 mm
20 mm
ECE ECE router plane 301052 301212 € 56.00

Blades for plough planes

Blades for plough planes

For plough planes made by ECE and ULMIA. In many cases these blades do NOT fit older plough planes! Ulmia and ECE blades are exchangeable.
  Width   Maker   for:   Order nr.   Price
3 mm Ulmia Ulmia plough plane 300322, 300323 300325 € 31.00
5 mm Ulmia Ulmia plough plane 300322, 300323 300326 € 31.00
7 mm Ulmia Ulmia plough plane 300322, 300323 300327 € 31.00
9 mm Ulmia Ulmia plough plane 300322, 300323 300328 € 31.00
12 mm Ulmia Ulmia plough plane 300322, 300323 300329 € 31.00
14 mm Ulmia Ulmia plough plane 300322, 300323 300331 € 31.00
Set of 6
3+5+7+9
+12+14mm
ECE ECE plough plane 301053 and Ulmia plough planes 301056 € 139.50

Filletster plane blade

Filletster plane blade for ECE-Filletster plane 301048

Notice: Does NOT fit the Ulmia-Filletster plane!
Width: 33 mm
Order nr. 301219
Price € 15.60

Nicker for filletster plane

Nicker for ECE-filletster plane (old type)

Notice: Does NOT fit the Ulmia filletster plane!
Width: 11 mm
Order nr. 301217
Price € 18.95

Screw for nicker

Screw for nicker for the ECE--filletster plane (old type)

Order nr. 301218
Price € 4.50

Falzhobeleisen

Filletster plane blade for Ulmia-Filletster plane 300341

Notice: Does NOT fit the ECE-filletster plane!
Width: 33 mm
Order nr. 300343
Price € 19.00

ECE-dovetail plane blade

ECE-dovetail plane blade for ECE-Dovetail plane 301049

Notice: Does NOT fit the Ulmia dovetail plane!
Width: 33 mm
Order nr. 301197
Price € 15.60



Ulmia-Grathobeleisen

Ulmia-dovetail plane blade for Ulmia-Dovetail plane 300342

Notice: Does NOT fit the ECE dovetail plane!
Width: 33 mm
Order nr. 300345
Price € 17.00