Dieter Schmid - Fine Tools
	Georg-Wilhelm-Str. 7 A - 10711 Berlin - Germany Tel ++49 (0)30 342 1757 - Fax ++49 (0)30 342 1764 Website: www.fine-tools.com

Dieter Schmid - Fine Tools Georg-Wilhelm-Str. 7 A - 10711 Berlin Tel ++49 30 342 1757 - Fax ++49 30 342 1764 Website: www.fine-tools.com

Overview Files and Rasps

Wood Rasps for Patternmakers, Cabinetmakers, Sculptors, Habilis Rasps, Needle Rasps

Wood rasps for pattern makers, cabinet makers, sculptors These rasps are made by F. DICK in cooperation with the Swiss filemaker VALLORBE/GROBET in Switzerland. The hardness is approx. 66 - 67 HRC. far more as for a rasp is usually asked. The cut is sharp. you can work fast and with a cut-5-rasp you get a smooth surface. A good choice for everyone who wants a tool that accompanies him for a long time. Alle files and rasps are supplied without handle. Find the handle here! Habilis Rasps These rasps come with build-in handle and are smaller than ordinary rasps but bigger than needle rasps. To see them scroll down or click here! Needle Rasps The smallest rasps available! You find them at the bottom of this page!

Rasps for pattern makers, cabinet makers, sculptors

Patternmaker's rasp hand Cuts on three sides
Cut	Length of Cut	Section	Order nr.	Price
5	150 mm	16 x 4 mm	D1512155	€ 21.50
5	200 mm	20 x 5 mm	D1512205	€ 27.40

Patternmaker's rasp halfround Cuts on both sides
Cut	Length of Cut	Section	Order nr.	Price
5	150 mm	12 x 5.3 mm	D1552165	€ 37.60
5	200 mm	20 x 5.5 mm	D1552205	€ 49.20

Patternmaker's rasp cabinet Cuts on both sides. The cabinet rasp is more wide and flat than a halfround rasp.
Cut	Length of Cut	Section	Order nr.	Price
5	150 mm	25 x 4.2 mm	D1558155	€ 39.10
5	200 mm	28 x 4.7 mm	D1558205	€ 49.90
5	300 mm	35.5 x 6 mm	D1558305	€ 74.30
3	200 mm	28 x 4.7 mm	D1558203	€ 34.30
3	250 mm	31.5 x 5.3 mm	D1558253	€ 39.90
3	300 mm	35.5 x 6 mm	D1558303	€ 52.00

Patternmaker's rasp round
Cut	Length of Cut	Section	Order nr.	Price
5	150 mm	6.3 mm	D1562155	€ 32.90
5	200 mm	8 mm	D1562205	€ 41.20

Rasp for staircase makers
Cut	Length of cut	Section	Order nr.	Price
2	250 mm	25 x 7 mm	D2301252	€ 31.00

Habilis Rasps

Habilis rasp hand - total length 205 mm Cuts on two sides
Cut	Length of cut	Section	Order nr.	Price
3	90 mm	10 x 4 mm	302560	€ 12.00

Habilis rasp halfround - Total length 205 mm Cut on both sides
Cut	Length of cut	Section	Order nr.	Price
3	90 mm	13.5 x 4.5 mm	302561	€ 16.80

Habilis rasp threeesquare - Total length 205 mm Cuts on all three sides
Cut	Length of cut	Section	Order nr.	Price
3	90 mm	10 mm	302562	€ 13.30

Habilis rasp square - Total length 205 mm Cut on all four sides
Cut	Length of cut	Section	Order nr.	Price
3	90 mm	7.5 mm	302563	€ 11.90

Habilis rasp round - Total length 205 mm
Cut	Length of cut	Section	Order nr.	Price
3	90 mm	7.8 mm	302564	€ 10.50

Set of Habilis rasps
Description	Order nr.	Price
consisting of one each: hand, halfround, threesquare, square, round in plastic pounch	302565	€ 63.50

Needle rasps for wood

Needle rasp hand - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	5 x 2 mm	302570	€ 6.90

Needle rasp halfround - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	5.2 x 2.5 mm	302571	€ 8.90

Needle rasp warding - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	5.5 x 2.2 mm	302572	€ 7.90

Needle rasp threesquare - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	3.3 mm	302573	€ 7.90

Needle rasp square - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	3.3 mm	302574	€ 7.90

Needle rasp round - Total length 140 mm
Cut	Cut length	Section	Order nr.	Price
4	65 mm	3.7 mm	302575	€ 7.20

Set of 6 Needle rasps
Description	Order nr.	Price
bestehend aus je 1 Needle rasp: hand, halfround, warding, threesquare, square, round in plastic pounch	302576	€ 45.90