Jack Planes, Low Angle Jack Planes

Jack Planes, Low Angle Jack Planes

The metal jack planes have mouth adjustment. The blade can be finely adjusted by means of the knurled-head screw, and the lateral adjustment is done with the lever.

Click pictures for enlargements!

KUNZ Jack Plane no. 5
KUNZ Jack Plane no. 5
Weight: 1900 g.
Length: 357 mm
Blade width: 50 mm
Plastic handle
Order nr. 301635 cart
Price € 69.50

Standard Replacement Blade
Order nr. 301681 cart
Price € 17,20

High Speed Steel Replacement Blade
Order nr. 301672 cart
Price € 76.90
JUUMA Jack Plane no. 5
JUUMA Jack Plane no. 5
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC and connected with a thick and stable chipbreaker. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
Total length 353 mm (14 in.)
Width of body 62 mm (2-7/16 in.)
Blade width 50.8 mm (2 in.)
Blade thickness 3.2 mm (1/8 in.)
Blade hardness: 61 - 63 HRC
Chipbreaker thickness 3 mm (1/8 in.)
Iron bedded at 45°
Weight 2750 g (6 lbs)
All Juuma Planes
Instructions (PDF 1 MB)
Order nr. 300036 cart
Price € 119.00

Repl. Blade for Juuma Jack Plane no. 5
Blade width 50.8 mm (2 in.)
Blade thickness 3.2 mm (1/8 in.)
Fits also many but not all common No 5 planes. You can easily check this by yourself by underlaying a piece of carton or veneer with a thickness 3.2 mm minus the thickness of your existing blade.
Order nr. 300035 cart
Price € 11.90
KUNZ PLUS Jack Plane No. 5
KUNZ PLUS Premium Line Jack Plane No. 5
It is here at last -- the long-awaited new plane from KUNZ!

The plane's body is made of stress-relieved gray cast iron. The sole is finished to a high standard and the cheeks are at a precise 90° to the sole. The relatively short iron, unlike the older Kunz #5, lies firmly on the cleanly machined top of the frog. The 3.5 mm thick iron is of optimized tool steel, hardened to 60 - 62 on the Rockwell Scale. A feature that will be appreciated by many is that cutting depth and blade angle is controlled with just one screw. The differentially cut threads on the screw provide a very fine and controlled adjustment of the cutting depth. One moves the frog in order to set the width of the mouth, but you are no longer required to detach the frog in order to do this; The frog can be loosened with the help of an Allen wrench provided with the plane. The frog itself is set in a carefully-machined groove, and so side-to-side adjustments are no longer necessary. The new plane's knob and grip are made of locally-harvested cherry wood with good ergonomics, and the tool lies easily in your hand.   Read more in the Kunzplus No. 4 description

All in all, it is safe to say that with this tool, Kunz has entered the ranks of premium tool makers!
Blade width: 49 mm
Blade thickness 3.5 mm
blade length 107 mm
Iron bedded at 45°
Total length 344 mm
Total width 62 mm
Weight 2400 g
Order nr. 301698 cart
Price € 179.00

Standard Replacement Blade
Order nr. 301697 cart
Price € 29.50

High Speed Steel Replacement Blade
High Speed steel blades hold the edge much longer but are more difficult to sharpen. Picture
Order nr. 301699 cart
Price € 70.00
CLIFTON Jack Plane no. 5
CLIFTON Jack Plane no. 5
with hand forged carbon steel blade
More details
Length: 355 mm
Blade width: 51 mm
Bubinga handle
Order nr. 303775 cart
Price € 359.00

Replacement Blade
Order nr. 303700 cart
Price € 69.00
JUUMA Low Angle Jack Plane
JUUMA Low Angle Jack Plane
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. Mouth adjustement goes smooth and allows settings for fine work. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price. Length: 350 mm
Blade width: 50,7 mm
Bevel 25°
Blade bed 12°
Weight 2450 g
All Juuma Planes
Order nr. 300056 cart
Price € 129.00

Replacement Blade 25°
Picture
Order nr. 300057 cart
Price € 9.50
KUNZ PLUS Premium Line Low Angle Jack Plane No. 62
KUNZ PLUS Premium Line Low Angle Jack Plane No. 62
Will be translated soon! Der Hobelkörper ist aus spannungsfrei geglühtem Grauguß. Die Hobelsohle ist fein geschliffen mit rechtwinklig gearbeiteten Wangen. Das Eisen liegt perfekt auf der sauber gefrästen Auflagefläche. Diese gefräste Auflagefläche ist an der Stelle, an der die Fase des Hobeleisens beginnt, rechts und links jeweils keilförmig unterbrochen. Dadurch wird das Hobeleisen im vorderen Bereich genau mittig gehalten, was die Lateralverstellung deutlich genauer macht. Das 5 mm dicke Eisen ist aus optimiertem Werkzeugstahl und auf 60 - 62 HRC gehärtet. Die Eisenzuführung für die Spandickeneinstellung und die seitliche Verstellung erfolgt nur mit einer einzigen Schraube. Das Differenzialgewinde dieser Schraube erlaubt eine sehr feinfühlige Einstellung der Spandicke. Das Hobelmaul kann durch Lösen des vorderen Knopfes verstellt werden. Griff und Knopf aus einheimischer Kirsche sind ergonomisch geformt und liegen hervorragend in der Hand!
Length: 350 mm
Blade width: 50 mm
Blade Bevel 25°
Blade bed angle 12°
Weight 2300 g
Order nr. 301655 In den Warenkorb
Price € 199.00

Replacement Blade 25°
Order nr. 301656 In den Warenkorb
Price € 32.50
VERITAS Low Angle Jack Plane
VERITAS Low Angle Jack Plane
Instructions
Guide d'instruction (français)
Video (5.5 MB)
Weight: 2700 g
Length: 381 mm (15 in.)
Blade width: 57 mm (2-1/4 in.)
Blade bevel 25°
with Bubinga handle

VERITAS Low Angle Jack Plane with A2 Blade
Order nr. 307930 cart
Price € 249.00

VERITAS Low Angle Jack Plane with PM-V11 Blade
Order nr. 308967 cart
Price € 285.00

Replacement Blades
The following 8 blades fit this Low Angle Jack Plane, the Veritas Bevel-Up Smoother with 57mm-blade (2-1/4 in.) and the Veritas Bevel Up Jointer Plane.

A2 Replacement Blade 25° Bevel
Order nr. 307931 cart
Price € 44.00

A2 High Angle Blade 38° Bevel
to use as regular jack plane.
Order nr. 307932 cart
Price € 44.00

A2 High Angle Blade 50° Bevel
especially for varying-grain woods.
Order nr. 307884 cart
Price € 44.00

A2 Toothed Blade 38° Bevel
Picture
The small, square teeth leave a textured surface that can be smoothed with a finely set plane or a scraper. Suitable for difficult grain! Note that this style of toothed blade works only with the bevel-up planes and not with the regular "bevel-down" bench planes.
Order nr. 307885 cart
Price € 54.50

O1 Replacement Blade 25° Bevel
Order nr. 308790 cart
Price € 39.00

PM-V11 Replacement Blade 25° Bevel
What is PM-V11-Steel?
Order nr. 308954 cart
Price € 57.00

PM-V11 Replacement Blade 38° Bevel
What is PM-V11-Steel?
Order nr. 308955 cart
Price € 57.00

PM-V11 Replacement Blade 50° Bevel
What is PM-V11-Steel?
Order nr. 325321 cart
Price € 57.00
Veritas nr. 5-1/4W Bench Plane
Veritas nr. 5-1/4W Bench Plane
The 5-1/4 was often referred to as a junior jack. At 305 mm (12 in.) long, it fell between the nr. 4 smooth plane at 254 mm (10 in.) long and the nr. 5 jack at 355 mm (14 in.) long.

The Veritas 5-1/4W varies from the traditional 5-1/4 in various ways, but the two most significant dimensional differences are that the Veritas has a 50 mm (2 in.) wide blade (rather than 44 mm - 1-3/4 in.) and the mouth is 110 mm (4-3/8 in.) back of the nose compared with 89 mm (3-1/2 in.) for the original. This extra length of sole in front of the blade makes it much easier to cut accurately because the extra-long nose makes it easier to maintain the sole flush to the material at the start of a cut. In fact, the combination of the mouth location and the very sensitive feed adjustment lets this plane serve as a jointer for most cabinet work, just as a nr. 5 is used as a jointer.

The 5-1/4W is made from ductile cast iron and has an adjustable frog with a combined feed and lateral adjust mechanism that is sturdy, yet sensitive and accurate. The easily adjusted frog is machined to fit snugly in the plane body and, combined with the 3.2 mm (1/8 in.) thick blade, eliminates virtually all blade chatter. Because the frog extends right through to the sole, adjusting the frog to narrow the mouth does not reduce blade support as it does in standard planes of this style.
Length: 305 mm (12 in.)
Blade width: 50 mm (2 in.)
with Bubinga handle

Veritas nr. 5-1/4W Bench Plane with A2 Blade
Order nr. 308751 cart
Price € 269.00

Veritas nr. 5-1/4W Bench Plane with PM-V11 Blade
Order nr. 308963 cart
Price € 283.00

A2 Replacement Blade
Order nr. 307909 cart
Price € 53.00

PM-V11 Replacement Blade
What is PM-V11-Steel?
Order nr. 308952 cart
Price € 56.90
CLIFTON Jack plane no. 5 1/2
CLIFTON Jack plane no. 5 1/2
with hand forged carbon steel blade.
Details
Length: 355 mm
Blade width: 60 mm
Weight: 3.34 kg
with Bubinga handle
Order nr. 303780 cart
Price € 369.00

Replacement Blade
Order nr. 303701 cart
Price € 79.00
 
Dieter Schmid - Fine Tools
logo
www.fine-tools.com
You are here:   Homepage   →   Planes   →   Jack Planes
Inc VAT Shipping is extra  |  99 % in stock!  |  Your cart  |  Fast order  |  Contact us  |  Help  |  Deutsch  |  Italiano
nachoben  |  Inc VAT Shipping is extra - view costs  |  About Us  |  Revocation right for consumers  | Terms  |  Data protection declaration  |  Battery disposal