Block Planes - the workhorse in many shops
In block planes for technical reasons the iron has the bevel upwards in the bed of the plane. If the manufacturer says, e.g., "iron angle 20°", you have to add on the bevel angle, of, e.g., 25°. That gives you the cutting angle - 45° in the example.
Click pictures for enlargements!
KUNZ Pocket Plane no. 100 with handle
Lovingly known as "Moppel" to German boatbuilders. Good for getting at awkward spots.
Length: 117 mm
Blade width: 25 mm
Cutting angle 41°
Order nr. 301625
Price € 13.50
Standard Replacement Blade
Order nr. 301680
Price € 4.20
High Speed Steel Replacement Blade
Order nr. 301693
Price € 16.65
Lovingly known as "Moppel" to German boatbuilders. Good for getting at awkward spots.
Length: 117 mm
Blade width: 25 mm
Cutting angle 41°
Order nr. 301625
Price € 13.50
Standard Replacement Blade
Order nr. 301680
Price € 4.20
High Speed Steel Replacement Blade
Order nr. 301693
Price € 16.65
KUNZ Pocket Plane no. 101
- as pocket plane 100, but without handle
Length: 85 mm
Blade width: 25 mm
Cutting angle: 41°
Order nr. 301626
Price € 13.50
Replacement blades same as for no. 100.
- as pocket plane 100, but without handle
Length: 85 mm
Blade width: 25 mm
Cutting angle: 41°
Order nr. 301626
Price € 13.50
Replacement blades same as for no. 100.
VERITAS Small Block Plane "Apron Plane"
approx. same size as any no. 102 plane
with blade adjustment
Weight: 450 g (1 lbs)
Length: 140 mm (5-1/2 in.)
Blade width: 32 mm (1-1/4 in.)
Cutting angle: 37 ° (Bed angle 12 °)
VERITAS "Apron Plane" with Carbon steel blade
Order nr. 307914
Price € 89.00
VERITAS "Apron Plane" with A2 steel blade
Order nr. 307915
Price € 99.00
Replacement Blade Carbon steel
Order nr. 307916
Price € 16.80
Replacement Blade A2 Tool Steel
Order nr. 307917
Price € 26.80
approx. same size as any no. 102 plane
with blade adjustment
Weight: 450 g (1 lbs)
Length: 140 mm (5-1/2 in.)
Blade width: 32 mm (1-1/4 in.)
Cutting angle: 37 ° (Bed angle 12 °)
VERITAS "Apron Plane" with Carbon steel blade
Order nr. 307914
Price € 89.00
VERITAS "Apron Plane" with A2 steel blade
Order nr. 307915
Price € 99.00
Replacement Blade Carbon steel
Order nr. 307916
Price € 16.80
Replacement Blade A2 Tool Steel
Order nr. 307917
Price € 26.80
JUUMA Block Plane
The plane's body is made of stress-relieved gray cast iron. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price. with blade adjustment
with mouth adjustment
Weight 850 g (2 lbs)
Total length 163 mm (6-1/2 in.)
Plane body width 44 mm (1-3/4 in.)
Blade width 35 mm (1-3/8 in.)
Blade thickness 3 mm (1/8 in.)
Blade hardness 61 - 63 HRC
Cutting angle: 45° (Iron bedded at 20°)
Enlargement
Rear view
Result of hardness test
All JUUMA planes
Order nr. 300030
advertising price € 49.00
The plane's body is made of stress-relieved gray cast iron. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price. with blade adjustment
with mouth adjustment
Weight 850 g (2 lbs)
Total length 163 mm (6-1/2 in.)
Plane body width 44 mm (1-3/4 in.)
Blade width 35 mm (1-3/8 in.)
Blade thickness 3 mm (1/8 in.)
Blade hardness 61 - 63 HRC
Cutting angle: 45° (Iron bedded at 20°)
Enlargement
Rear view
Result of hardness test
All JUUMA planes
Order nr. 300030
advertising price € 49.00
VERITAS Standard Block Plane
with blade adjustment
with mouth adjustment
with A2 steel blade
Weight: 850 g (1.85 lbs)
Length: 152 mm (6 in.)
Blade width: 41 mm (1-5/8 in.)
Cutting angle: 45° (Iron bedded at 20°)
Order nr. 307905
Price € 138.00
Replacement Blade A2-Steel
suitable for both Veritas Standard Block Plane and Veritas Low Angle Block Plane
Order nr. 307901
Price € 38.50
with blade adjustment
with mouth adjustment
with A2 steel blade
Weight: 850 g (1.85 lbs)
Length: 152 mm (6 in.)
Blade width: 41 mm (1-5/8 in.)
Cutting angle: 45° (Iron bedded at 20°)
Order nr. 307905
Price € 138.00
Replacement Blade A2-Steel
suitable for both Veritas Standard Block Plane and Veritas Low Angle Block Plane
Order nr. 307901
Price € 38.50
Chamfer Guide for Veritas Block Planes
Adjustable for chamfers up to 13 mm (1/2 in.) wide
Order nr. 307904
Price € 27.50
You can convert the Veritas Low-angle Block Plane and Standard Block Plane into chamfer planes in seconds with this cunning guide.
Adjustable for chamfers up to 13 mm (1/2 in.) wide
Order nr. 307904
Price € 27.50
You can convert the Veritas Low-angle Block Plane and Standard Block Plane into chamfer planes in seconds with this cunning guide.
VERITAS Low Angle Block Plane
with blade adjustment
with mouth adjustment
with A2 steel blade
Weight: 850 g (1.85 lbs)
Length: 152 mm (6 in.)
Blade width: 41 mm (1-5/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307900
Price € 138.00
with blade adjustment
with mouth adjustment
with A2 steel blade
Weight: 850 g (1.85 lbs)
Length: 152 mm (6 in.)
Blade width: 41 mm (1-5/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307900
Price € 138.00
Ball Tail for Veritas Low Angle Block Plane
Knob length: 65 mm (2-3/8 in.)
Diameter: 41 mm (1-5/8 in.)
Order nr. 307902
Price € 32.00
Knob length: 65 mm (2-3/8 in.)
Diameter: 41 mm (1-5/8 in.)
Order nr. 307902
Price € 32.00
Front Knob for Veritas Low Angle Block Plane
Height: 50 mm (2 in.)
Diameter: 41 mm (1-5/8 in.)
Order nr. 307903
Price € 9.90
The ball tail and tall knob can convert the Veritas low-angle block plane into a small low-angle smoothing plane.
Height: 50 mm (2 in.)
Diameter: 41 mm (1-5/8 in.)
Order nr. 307903
Price € 9.90
The ball tail and tall knob can convert the Veritas low-angle block plane into a small low-angle smoothing plane.
VERITAS DX60 Block Plane
This is the black version of the new Veritas planes and is a part of their standard line. This is the standard version made from regular ductile iron, has a die-cast lever cap, and is finished with a durable powder-coat polymer paint.
This plane is made to exacting standards and has newly refined stainless-steel hardware. The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. More ...
Includes blade adjustment and mouth adjustment
With A2 steel blade
Weight: 880 g (1.85 lbs)
Length: 178 mm (7 in.)
Blade width: 35 mm (1-3/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307715
Price € 172.00
Replacement Blade A2-Steel
Order nr. 307716
Price € 35.50
This is the black version of the new Veritas planes and is a part of their standard line. This is the standard version made from regular ductile iron, has a die-cast lever cap, and is finished with a durable powder-coat polymer paint.
This plane is made to exacting standards and has newly refined stainless-steel hardware. The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. More ...
Includes blade adjustment and mouth adjustment
With A2 steel blade
Weight: 880 g (1.85 lbs)
Length: 178 mm (7 in.)
Blade width: 35 mm (1-3/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307715
Price € 172.00
Replacement Blade A2-Steel
Order nr. 307716
Price € 35.50
VERITAS NX60 Premium Block Plane
This is the polished version of the new Veritas planes and is a part of their new premium line. This premium version is made from a corrosion-resistant material – a nickel-resist ductile iron. Significantly more expensive than regular ductile iron, it contains about 20% nickel and retains all of the beneficial properties of regular ductile iron. It also requires slower feed rates during production.
This plane is made to exacting standards and has newly refined stainless-steel hardware. The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. More ...
Includes blade adjustment and mouth adjustment
With A2 steel blade
Weight: 880 g (1.85 lbs)
Length: 178 mm (7 in.)
Blade width: 35 mm (1-3/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307717
Price € 249.00
Replacement Blade A2-Steel
Order nr. 307716
Price € 35.50
This is the polished version of the new Veritas planes and is a part of their new premium line. This premium version is made from a corrosion-resistant material – a nickel-resist ductile iron. Significantly more expensive than regular ductile iron, it contains about 20% nickel and retains all of the beneficial properties of regular ductile iron. It also requires slower feed rates during production.
This plane is made to exacting standards and has newly refined stainless-steel hardware. The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. More ...
Includes blade adjustment and mouth adjustment
With A2 steel blade
Weight: 880 g (1.85 lbs)
Length: 178 mm (7 in.)
Blade width: 35 mm (1-3/8 in.)
Cutting angle: 37° (Iron bedded at 12°)
Order nr. 307717
Price € 249.00
Replacement Blade A2-Steel
Order nr. 307716
Price € 35.50
