Dozuki - Japanese Saw with back
The Dozuki is a backed saw for joints and tenons. The back lends rigidity, enabling very precise cuts to be made. Click images for enlargements!
Our standard professional saws with impulse hardened teeth
Dozuki "DUO" is made for ripcut and crosscut. It is the ideal dovetail saw. Disassembled this saw is only 33 cm (13 in.) long, length with handle 56.5 cm (22 in.)
Please check our Set-offer.
Classes: Buy 10 or more and pay only € 27.50 each!
Japanese Saw with back
Length of blade: 240 mm
Width of blade: 50 mm
Thickness of blade: 0,3 mm
Kerf: 0.45 mm
Pitch: 18 TPI (1.4 mm)
Total length: 56.5 mm
Order nr. 312028
Price € 29.95
Repl. blade for Dozuki "DUO"
Order nr. 312029
Price € 13.95
Leather Sheath
Order nr. 109051
Price € 4.95
Very good saw for chiefly across the grain. With impulse hardened teeth! This saw has very slim teeth for fine cuts and not suited for hardwoods - teeth can break!
Industrial made supreme quality saws with resharpenable blade
Our top range of those with exchangeable blades! For the finest cuts and high surface quality, with extended back to give blade greater stability. These saws are resharpenable. The entire blade is made of very hard steel and therefore it is no need for impulse hardening for these saws. If you do not know which saw is the right for you, consider that it is more easy to make very accurate cuts using a saw with less blade width. The blades are interchangeable! Not for beginners! Why?
Length of blade: 240 mm
Thickness of blade: 0.27 mm
Kerf: 0.4 mm
Pitch: 28 TPI (0.9 mm)
KIJIMA Dozuki with blade 40 mm wide
Order nr. 309448
Price € 55.00
Repl. Blade 40 mm wide
Order nr. 309449
Price € 29.00
KIJIMA Dozuki with blade 53 mm wide
Order nr. 309450
Price € 55.00
Repl. Blade 53 mm wide
Order nr. 309451
Price € 29.00
KIJIMA Dozuki with blade 62 mm wide
Order nr. 309453
Price € 57.00
Repl. Blade 62 mm wide
Order nr. 309454
Price € 31.00
Traditional made high end saws
This saw of professional quality is made by a small saw-smithy in Miki City, Japan. Our finest saw! Now we are happy to be able to add to the Dozuki for crosscut now a Dozuki for ripcut. This saw is ideal for the finest dovetails and small tenons. We testet it and found that it is the finest available of its kind. Not for beginners! Why? The blade is only 0.2 mm (0.008 inches) thick and you can imagine that this saws deserves proper treatment. Enlargement and more saws of this range.
Length of blade: 180 mm
Width of blade: 40 mm
Thickness of blade: 0.2mm
Thickness of shaft: up to 0.7 mm
Kerf: 0.35 mm
Professional Dozuki Crosscut
Pitch: 32 TPI (0.8 mm)
Order nr. 312060
Price € 88.00
Professional Dozuki Ripcut
Pitch: 17 TPI (1.5 mm)
Order nr. 312061
Price € 88.00
Mini saws
We offer a saw for ripcut and crosscut which is very good for small tenons. Additionally we offer the same type with crosscut blade. The blade is exchangeable and interchangeable between both saws. Notice: A crosscut made with the crosscut blade is smoother than with the blade for ripcut and crosscut.
Enlargement
Blade length: 190 mm (7-1/2 in.)
Blade thickness: 0.3 mm (0.012 in.)
total length: 410 mm (16 in.)
Kerf: 0.45 mm (0.018 in.)
Pitch: 18 TPI (1.4 mm)
Comes with plastic handle
Dozuki "Duo" Short
Crosscut and Ripcut
Order nr. 312036
Price € 20.90
Repl. Blade Crosscut and Ripcut
Picture
Order nr. 312037
Price € 13.20
Dozuki Short Crosscut
Order nr. 312038
Price € 20.90
Repl. Blade Crosscut
Order nr. 312039
Price € 13.20
Very fine and clean cuts you achieve with this small saw. Made for crosscut.
The Mini Fine comes with smaller pitch and makes a smaller kerf. Made for crosscut. The blades of both Mini Z-Saws are interchangeable.
This nice small traditional saw allows fine and fast cuts. Blade not exchangeable! Click here to see the sister Ryoba saw! Enlargement!
for ripcut and crosscut
with wooden handle
Blade length: 120 mm
Blade thickness: 0.2 mm
Total lenght: 320 mm
Kerf: 0.25 mm
pitch: 32 TPI (0.8 mm)
Order nr. 312052
Price € 21.50
Sold out! We still offer replacement blades.
Blade length: 160 mm
Blade thickness: 0.3 mm
Total length: 340 mm
Kerf: 0.35 mm
Pitch: 0.8 mm
Ripcut Repl. Blade
Pitch 1.4 mm (18 TPI)
Order nr. 312183
Price € 14.40 (Now 10.00)
Saw storage and protection
suitable for all saws up to 330 mm blade length
To achieve best protection and when appearance is in the second line!!
All bags: saws on pictures NOT included!
Order nr. 109056
Price € 9.95
suitable for all saws up to 330 mm blade length
Notice: We recommend the canvas saw holders for the more expensive saws, even if you have to store only one saw. It simply looks better.
All bags: saws on pictures NOT included!
Canvas saw holder undyed for 3 Japanese saws
Order nr. 309858
Price € 9.50
Canvas saw holder undyed for 5 Japanese saws
Order nr. 309860
Price € 16.00
suitable for all saws up to 330 mm blade length
All bags: saws on pictures NOT included!
Order nr. 309861
Price € 21.80
suitable for all saws up to 160 mm blade length
All bags: saws on pictures NOT included!
Enlargement inside
Enlargement outside
Enlargement with saws
Order nr. 312049
Price € 29.50
