Dieter Schmid - Fine Tools
	Georg-Wilhelm-Str. 7 A - 10711 Berlin - Germany Tel ++49 (0)30 342 1757 - Fax ++49 (0)30 342 1764 Website: www.fine-tools.com

Dieter Schmid - Fine Tools Georg-Wilhelm-Str. 7 A - 10711 Berlin Tel ++49 30 342 1757 - Fax ++49 30 342 1764 Website: www.fine-tools.com

Overview Drilling in Wood Please follow this link to find tenon and plug cutters!

Machine Drill Bits, Forstner Bits, Dowel and Tenon Cutter, Extra long Bradpoint Drills, Extensions for Bits, Circle Cutter, Drilling Jig

Our drill bits are made by FAMAG in Remscheid, Germany. The circle cutter is Japanese made.

	The BORMAX toothed Forstner-bit (Series 1622) enter cleanly into softwood, European hardwood, and plywood. The advantage to the traditional Forstner bit is less heat appearance and as a result a much better edge holding ability. You can use it freehand or in the drilling machine and in the drill press. All measurements in mm if not stated otherwise!

Diameter mm	Shaft mm	Overall length	Cutting length	Order nr.	Price
11.5	8	90	57	304743	€ 42.00
12	8	90	57	304776	€ 20.30
12.5	8	90	57	304750	€ 42.00
13	8	90	57	304777	€ 20.90
13.5	8	90	57	304746	€ 42.00
14	8	90	57	304778	€ 20.40
14.5	8	90	57	304756	€ 42.00
15	8	90	57	304779	€ 20.40
15.5	8	90	57	304745	€ 42.00
16	8	90	57	304780	€ 20.40
17	8	90	57	304773	€ 22.20
18	8	90	57	304781	€ 22.20
19	8	90	57	304782	€ 22.20
20	8	90	57	304783	€ 22.20
21	8	90	57	304784	€ 26.70
22	8	90	57	304785	€ 24.10
23	8	90	57	304786	€ 24.80
24	8	90	57	304787	€ 24.80
25	8	90	57	304788	€ 25.80
26	8	90	57	304789	€ 25.80
27	8	90	57	304790	€ 33.20
28	8	90	57	304791	€ 29.80
29	8	90	57	304751	€ 36.50
30	8	90	57	304792	€ 29.80
32	10	90	57	304793	€ 29.80
33	10	90	57	304752	€ 36.50
34	10	90	57	304794	€ 36.10
35	10	90	57	304795	€ 36.10
36	10	90	57	304774	€ 42.10
38	10	90	57	304775	€ 42.10
40	10	90	57	304796	€ 42.10
42	10	90	57	304771	€ 55.10
43	10	90	57	304772	€ 55.10
45	10	90	57	304797	€ 55.10
46	10	90	57	304753	€ 61.20
48	10	90	57	304754	€ 61.50
49	10	90	57	304755	€ 89.90
50	10	90	57	304798	€ 61.20
55	12	90	57	304799	€ 89.70
The following Bormax-bits are extra long (Series 1623)
Diameter mm	Shaft mm	Overall length	Cutting length	Order nr.	Price
12	13	120	70	304867	€ 29.50
13	13	125	75	304829	€ 29.50
14	13	125	75	304830	€ 29.50
15	13	125	75	304831	€ 27.50
16	13	125	75	304832	€ 29.90
18	13	130	80	304833	€ 32.50
19	13	130	80	304834	€ 32.50
20	13	130	80	304835	€ 29.70
22	13	130	80	304836	€ 32.50
23	13	135	85	304837	€ 36.70
24	13	135	85	304838	€ 33.50
25	13	135	85	304839	€ 33.90
26	13	135	85	304840	€ 36.90
27	13	135	85	304841	€ 38.50
28	13	135	85	304842	€ 38.50
30	13	140	90	304843	€ 39.30
32	13	140	90	304844	€ 41.90
34	13	140	90	304845	€ 50.40
35	13	145	95	304846	€ 45.40
36	13	145	95	304847	€ 49.70
37	13	145	95	304848	€ 54.20
38	13	145	95	304849	€ 54.20
40	13	145	95	304850	€ 54.20
42	13	150	100	304851	€ 64.90
45	13	150	100	304852	€ 69.90
50	13	155	105	304853	€ 77.20
55	13	155	105	304854	€ 113.00
58	13	155	105	304855	€ 115.60
60	13	155	105	304856	€ 115.60
65	13	160	110	304857	€ 137.20
68	13	160	110	304858	€ 148.50
70	13	160	110	304859	€ 148.50
75	13	160	110	304860	€ 179.90
80	13	160	110	304861	€ 195.00
85	13	160	110	304862	€ 248.00
The shaft of the following bits is 16 mm and therefore they do not fit into a standard drilling machine with 13 mm drilling jig. Use only in a drill press, clamp the workpiece!
90	16	160	110	304863	€ 289.00
95	16	160	110	304864	€ 339.00
100	16	160	110	304865	€ 389.00

Bormax-Forstner bits in INCH measurements!
Diameter  INCH	Diameter  mm	Shaft  thickness	Total  length	Cutting  length	Order  nr.	Price  €
5/8	15.88	8	90	57	304653	€ 22.50
11/16	17.46	8	90	57	304654	€ 24.50
3/4	19.05	8	90	57	304655	€ 24.50
13/16	20.64	8	90	57	304656	€ 29.40
7/8	22.23	8	90	57	304657	€ 26.50
15/16	23.81	8	90	57	304658	€ 27.30
1	25.40	8	90	57	304659	€ 28.40
1-1/8	28.58	8	90	57	304660	€ 39.80
1-1/4	31.75	10	90	57	304662	€ 32.80
1-3/8	34.93	10	90	57	304663	€ 36.10
1-1/2	38.10	10	90	57	304664	€ 46.40
1-5/8	41.27	10	90	57	304666	€ 60.50
1-3/4	44.45	10	90	57	304667	€ 60.50
1-7/8	47.63	10	90	57	304668	€ 67.30
2	50.8	10	90	57	304669	€ 82.50
The following Bormax-bits in INCH measurements are extra long (Series 1623)
2-1/2	63.5	13	155	105	304674	€ 137.20

	Forstner drill bits for clean cuts in softwood. We carry 8 mm and 10 mm, as these sizes are not available as Bormax drill bits. All measurements in mm!

Diameter	Shaft	Overall  length	Cutting  length	Brand	Order nr.	Price
8	8	90	60	Fisch	306100	€ 15.90
10	8	90	60	Fisch	316102	€ 12.50
10	13	120	70	Famag	304866	€ 29.50

	Bormax, Set of 5 in wooden box, 15, 20, 25, 30, 35mm Order nr. 304688 € 98.00     You save EUR 36.30 =and the wooden box is a gift!
	Bormax Set of 15 in wooden box, 10, 12, 15, 16, 18, 20, 22, 25, 26, 28, 30, 35, 40, 45, 50 mm The 10 and 12mm drill bits of this set are traditional Forstner bits, as these sizes are not available as Bormax toothed drill bits. Order nr. 304689 € 299.00     You save EUR 156.60 =and the wooden box is a gift!

Carbide tipped Forstner Bits The BORMAX3 made by Famag (Series 1663) is the first carbide tipped Forstner bit. You can use it freehand or in the drilling machine and in the drill press. This bit cuts cleanly into softwood, all hardwood, and all kinds of plywood and chipboards. Even extreme hard tropical woods like Bongossi are no problem for this bit. All measurements in mm! Read more about this really universal wood drill!

Diameter	Shaft	Overall length	Cutting length	Order nr.	Price
15	8	90	57	304600	€ 55.60
16	8	90	57	304601	€ 57.10
18	8	90	57	304602	€ 57.10
20	8	90	57	304603	€ 57.10
22	10	90	57	304604	€ 58.70
25	10	90	57	304605	€ 58.70
26	10	90	57	304606	€ 58.70
30	10	90	57	304607	€ 60.30
35	10	90	57	304608	€ 62.90
40	10	90	57	304609	€ 74.70
45	10	90	57	304610	€ 96.50
50	10	90	57	304611	€ 110.60

	Bormax3 Carbide tipped Forstner Bits, Set of 5 in wooden box You save EUR 25.60 and the wooden box is a gift! Set 1: 15, 20, 25, 30, 35 mm Order nr. 304618 € 269.00 Even cheaper now! Check our special offer page! Set 2: 16, 18, 20, 22, 25 mm Order nr. 304619 € 263.10

New from FAMAG! The Bormax Centre Drill Forstner Bit, with a central tube in which to fix a normal bit as a drilling guide, permits one to precisely drill, free hand, large holes in situations where the hole must be drilled at an angle, for instance the holes to take spindles on a stair railing. The bit is designed to be used on soft woods, European hardwoods, particle board, and MDF. The pilot bit is fixed into the main bit with an Allen wrench, and it can be exchanged for a shorter point, to allow one to make flat-bottomed holes in thinner materials where one does not want to drill through the piece, as with a normal Bormax Forstner bit. The hole to take the guide bits extends all the way through the Bormax bit's shaft to allow jammed or frozen bits to be pushed out using a special rod included with every kit. Included in bit's kit: BORMAX bit Pilot bit: extends 20 to 30 mm out of the shaft Traditional centre point Allen wrench Rod for freeing jammed bit Recommended drill speed: 750 - 2500 rpm All sizes in millimeters!

Diameter	Shaft	Total length	cutting length	Order nr.	Price
15	10	90	57	304915	€ 38.00
16	10	90	57	304916	€ 38.00
18	10	90	57	304918	€ 39.20
20	10	90	57	304920	€ 40.80
22	10	90	57	304922	€ 45.20
25	10	90	57	304925	€ 49.90
30	10	90	57	304930	€ 59.40
35	10	90	57	304935	€ 65.40
Replacement Centre Point total length 21 mm, diameter 4 mm				304952	€ 7.30
Replacement Drill Bit total length 40 mm, diameter 4 mm				304953	€ 4.90

Bormax Centre Drill Forstner Bits, Set of 5 in wooden box Included in set: 5 Bormax Centre Drill Forstner Bits with replaceable traditional centre point 1 Pilot bit: extends 20 to 30 mm out of the shaft 1 Allen wrench 2 mm 1 Allen wrench 2.5 mm Rod for freeing jammed bit Set 1: 15, 20, 25, 30, 35 mm Order nr. 304950 € 229.00 You save EUR 24.50 and the wooden box is a gift! Even cheaper now! Check our special offer page! Set 2: 16, 18, 20, 22, 25 mm Order nr. 304951 € 195.00 You save EUR 18.10 and the wooden box is a gift!

Extension for BORMAX drill bits If 57 mm cutting length of the Bormax is not enough, you can use these extensions for deeper holes. They are suitable too for all other drill bits with a shaft of 8 or 10 or 13 mm, if it is paid attention to the minimum cutting diameter of the drill bit. You need a 2.5 mm hexagonal bit to fit the extension. Please note there are different shaft sizes of "Bormax" and "Bormax 3 carbide tipped" forstner bits! All measurements in mm!

For drill bit shaft and diameter:	Shaft of  extension	Total  length	Extended  cutting  length	Order nr.	Price
8 mm, for Bormax 18 - 30mm, for Bormax3 carbide tipped 15 - 20 mm, and other drill bits with minimum cutting diameter of 18 mm	10	130	100	304541	€ 22.30
8 mm, for Bormax 18 - 30mm, for Bormax3 carbide tipped 15 - 20 mm, and other drill bits with minimum cutting diameter of 18 mm.	10	250	220	304542	€ 24.70
10 mm, for Bormax 32 - 55mm, for Bormax3 carbide tipped 22 - 50 mm, and other drill bits with minimum cutting diameter of 18 mm.	10	130	100	304543	€ 22.30
10 mm, for Bormax 32 - 55mm, for Bormax3 carbide tipped 22 - 50 mm, and other drill bits with minimum cutting diameter of 18 mm.	10	250	220	304544	€ 24.70
13 mm, for long Bormax 58 - 85mm, and other drill bits with minimum cutting diameter of 24 mm.	13	130	100	304546	€ 24.70
13 mm, for long Bormax 58 - 85mm, and other drill bits with minimum cutting diameter of 24 mm.	13	250	220	304547	€ 28.10

	Brad-point drills made by FAMAG series 1590 with center point, and outlining spurs for clean entry, made of high carbon steel, suitable for softwood and some European hardwoods. All measurements in mm!

Diameter	Shaft	Overall length	Cutting length	Order nr.	Price
3	3	61	33	304503	€ 3.30
4	4	75	43	304504	€ 3.35
5	5	86	52	304505	€ 3.50
6	6	93	57	304506	€ 3.50
7	7	109	69	304507	€ 4.20
8	8	117	75	304508	€ 4.20
9	9	125	81	304509	€ 4.50
10	10	133	87	304510	€ 5.20
11	10	142	94	304511	€ 6.20
12	10	151	101	304512	€ 6.95
13	10	151	101	304513	€ 8.10
14	10	140	93	304514	€ 11.60
15	10	140	93	304515	€ 15.10

	Brad-point drills HSS-G by FAMAG Series 1594, best quality, milled, with center point, and outlining spurs for clean entry. For softwood, hardwood and all kinds of plywood. The best you can get! Made in Germany Measurements in mm!

	Brad-point drill bits HSS-G with hexagonal shaft 1/4 in. made by FAMAG Series 1596. Allows quick change when using hexagonal chuck All measurements in mm!

Please follow this link to find tenon and plug cutters!

Drilling jig This drilling jig from FAMAG features continuously adjustable depth stops, which allow you to drill accurate vertical holes in larger workpieces. The fixture is especially effective when used with large-diameter bits. Easily attached to your drill - suitable for all drills with 43 mm European chucks. Enlargement Drill NOT included Overall length of bit: 350 mm (13 3/4 in.) Maximum hole depth: 320 mm (12 9/16 in.) Maximum hole diameter: 85 mm (3 3/8 in.) Internal dimensions: 155 x 100 mm (6 1/8 in. x 4 in.) External dimensions: 200 x 150 mm (7 7/8 in. x 5 7/8 in.)   Order-nr. 304872 Price € 187.50

	Circle Cutter This adjustable circle cutter made in Japan cuts precise circles in wood, plywood and chipboard. Enlargement and Instructions Cutting diameter: 30 - 120 mm Max. depth of cut: 25 mm When bored from 2 sides: 50 mm R.P.M.: max 1000 min-1 Thickness of shaft: 10 mm Order nr. 312210 Price € 41.90

With these additional measure bars you can make larger circles. Use drill press and clamp the workpiece! The speed of the drill press should be significantly less than 1000 min-1.

Additional measure bar for larger circles Cutting diameter: 30 - 200 mm Order nr. 312212 Price € 7.40 Cutting diameter: 30 - 300 mm Order nr. 312213 Price € 11.80

Set of H.S.S. replacement blades Order nr. 312211 Price € 12.90

Safety and Dust Cover for Japanese Circle Cutter Inside diameter 165 mm Outside diameter 200 mm Depth 125 mm Not suitable in conjunction with 200 mm and 300 mm bars. When using with our circle cutter, you do not need the adaptor, which comes with the cover. The adaptor is necessary, when you use the cover with other boring tools. Order nr. 312214 Price € 49.50

Forstner bits in INCH-measurements from old stock - Special offer! These Forstner bits come from a German tool factory shut down a while ago. They have been stocked for several years and have not been used. They come in best condition, but can have some minor rust spots at the shaft (not at the protected cutters). Quality made in Germany!