Tormek Replacement Parts
Tormek Replacement Parts for Model 2000 to 2006 and T7
The large grinder!
| Replacement Parts for Model 2000 to 2006 and T7 "Qty" means the number of the specific part you need for one machine, price is for on piece! |
||||
|---|---|---|---|---|
| Pos. | Denomination | Qty | Order nr. | Price |
| 1 | SG-250 Super-Grind Stone | 1 | 301300  |
€ 136.00 |
| 2 | Housing | 1 | 301337 |
€ 105.00 |
| 4 | Drive wheel with friction ring | 1 | 301349 |
€ 39.50 |
| 5 | LA-220 Leather Honing wheel | 1 | 301301 |
€ 49.00 |
| 7 | WB-250 Water trough | 1 | 301320 |
€ 14.50 |
| 8 | Mounting shaft | 1 | On request | |
| 9 | Handle incl. nut and washer | 1 | On request | |
| 10 | Main Shaft no longer available separately. Please order the kit below |
1 | ||
| 10, 16, 29, 30, 31, 39 | MSK-250 Set for Tormek large: 1 EzyLock Main Shaft stainless, 2 Nylon Bearings, 1 Washer for the Stone, 1 Washer for the Drive Wheel, 1 Nut EzyLock, 1 Locking Pin for Drive Wheel. Notice: The EzyLock Nut reduces the required washers from 2 to 1. This new EzyLock Main Shaft Kit uses a self-tightening stainless steel knob to secure the grindstone. No tools are required and you do not need to exert any pressure on the nut to secure the grindstone. It is now very easy to change grindstones. Fits also the older Tormek machines. |
1 | 301331 |
€ 37.50 |
| 11 | Motor 200 W | 1 | 301357 |
€ 195.00 |
| 15 | Cover for switch | 1 | On request | |
| 16 | Nylon bearing | 2 | 301332 |
€ 3.95 |
| 18 | Rubber foot | 4 | 301351 |
€ 3.60 |
| 20 | Machine label (not shown on drawing) | 1 | On request | |
| 21 | Cord set (plug as on picture!) | 1 | On request | |
| 22 | Cord set bushing | 2 | 301354 |
€ 3.60 |
| 24 | Switch | 1 | 301355 |
€ 13.90 |
| 29 | Washer for the stone | 2 | 301341 |
€ 5.10 |
| 30 | Washer for the drive wheel | 1 | 301345 |
€ 2.20 |
| 31 | Nut M12 H=6 near the stone | 1 | 301342 |
€ 2.60 |
| 32 | Screw for switch cover | 2 | On request | |
| 39 | Locking pin | 1 | 301343 |
€ 1.55 |
| 41 | Screw | 1 | On request | |
| 44 | Brass nut | 3 | On request | |
| 46 | Folded washer | 1 | On request | |
| 47 | Locking washer | 2 | On request | |
| 50 | Locking knob for honing wheel | 1 | 301352 |
€ 8.95 |
| 51 | Nut M12 H=4 between drive wheel and Honing wheel | 1 | 301350 |
€ 4.95 |
| 54 | Sleeve for universal support | 2 | 301348 |
€ 14.50 |
| 55 | Locking screw for universal support | 3 | 301347 |
€ 7.35 |
| 56 | Nut for sleeve | 2 | 301346 |
€ 3.90 |
| 59 | US-105 Universal support with adjusting nut Picture | 1 | 301330 |
€ 29.90 |
| 62 | XB-100 Horizontal base | 1 | 301307 |
€ 19.90 |
| 63 | Screw for horizontal base | 4 | On request | |
| 64 | Locking screw for horizontal base | 2 | On request | |
| 65 | Washer for horizontal base | 4 | On request | |
| 66 | US-105-N Adjusting nut for universal support | 1 | 301369 |
€ 7.50 |
Tormek Replacement Parts for Model 1200 to 1206 and T3
The small grinder!
| Replacement Parts for Model 1200 bis 1206 und T3 "Qty" means the number of the specific part you need for one machine, price is for on piece! |
||||
|---|---|---|---|---|
| Pos. | Denomination | Qty | Order nr. | Price |
| 1 | SG-200 Super-Grind Stone | 1 | 301303 |
€ 89.00 |
| 2 | Housing | 1 | 301338 |
€ 31.50 |
| 3 | Grating | 1 | On request | |
| 4 | Drive wheel with friction ring | 1 | 301353 |
€ 27.50 |
| 5 | LA-145 Honing wheel | 1 | 301304 |
€ 38.00 |
| 7 | WB-200 Water trough | 1 | 301328 |
€ 13.50 |
| 8 | Mounting shaft | 1 | On request | |
| 9 | Locking ring | 1 | On request | |
| 10 | Main shaft | 1 | 301335 |
€ 25.00 |
| 11 | Motor 120 W | 1 | 301356 |
€ 165.00 |
| 15 | Cover for switch | 1 | On request | |
| 16 | Nylon bearing | 2 | 301332 |
€ 3.95 |
| 18 | Rubber foot | 4 | 301358 |
€ 1.90 |
| 20 | Machine label (not shown on drawing) | 1 | On request | |
| 21 | Cord set (plug as on picture!) | 1 | On request | |
| 23 | Strain relief | 1 | On request | |
| 24 | Switch | 1 | 301355 |
€ 13.90 |
| 29 | Washer for the stone | 2 | 301341 |
€ 5.10 |
| 30 | Washer for the drive wheel | 1 | 301345 |
€ 2,20 |
| 31 | Nut M12 H=6 near the stone | 2 | 301342 |
€ 2.60 |
| 32 | Screw vor switch cover | 2 | On request | |
| 39 | Locking pin for drive wheel | 1 | 301343 |
€ 1.55 |
| 41 | Screw | 1 | On request | |
| 42 | Nut for strain relief | 1 | On request | |
| 44 | Brass nut | 3 | On request | |
| 46 | Folded washer | 1 | On request | |
| 47 | Locking washer | 2 | On request | |
| 54 | Sleeve for universal support (not shown on drawing) | 2 | 301348 |
€ 14.50 |
| 55 | locking screw for universal support | 3 | 301347 |
€ 7.35 |
| 58 | Nut for sleeve | 2 | 301346 |
€ 3.90 |
| 59 | US-105 Universal support with adjusting nut Picture | 1 | 301330 |
€ 29.90 |
| 62 | XB-100 Horizontal base | 1 | 301307 |
€ 19.90 |
| 63 | Screw for horizontal base | 4 | On request | |
| 64 | Locking screw for horizontal base | 2 | On request | |
| 65 | Washer for horizontal base (not shown on drawing) | 4 | On request | |
| 66 | US-105-N Adjusting nut for universal support | 1 | 301369 |
€ 7.50 |
