Round bench dogs made by Veritas

Dieter Schmid - Fine Tools

Georg-Wilhelm-Str. 7 A - 10711 Berlin
Tel ++49 30 342 1757 - Fax ++49 30 342 1764
Website: www.fine-tools.com

To prices and other tools

Round bench dogs made by VERITAS

These bench dogs, available in two length, are excellent additions to a new or existing workbench. Simply drill 3/4" (19mm) holes at regular intervalls through the top of your workbench to turn it into a versatile clamping table. With a rond dog in one of the hole and another in a hole drilled in a wood vise, you can clamp just about any size object to your bench.

above a drawer The short bench pubs are very useful, when a drawer is under the desk.

instead of side bench dogs Round short bench pups can also be used for side clamping by drilling holes in the front of your bench. With a round dog in your bench skirt and another in a hole drilled in your end vise, you can secure work to the front of the skirt for side clamping without fumbling for clamps. Make the holes not deeper than 45mm, to remove the pups without problems.

template Use a predrilled block to ensure 90° holes. The dog hole spacing is of your choise.
Skizze Bankhaken 2° inclined face pulls work down to the bench surface.

in conjunction with front vise Top and side clamping with bench dog and vise.

Top and side clamping with bench dogs and Wonder Dog clamps

Round bench dogs made by VERITAS
	These bench dogs, available in two length, are excellent additions to a new or existing workbench. Simply drill 3/4" (19mm) holes at regular intervalls through the top of your workbench to turn it into a versatile clamping table. With a rond dog in one of the hole and another in a hole drilled in a wood vise, you can clamp just about any size object to your bench.
	The short bench pubs are very useful, when a drawer is under the desk.
	Round short bench pups can also be used for side clamping by drilling holes in the front of your bench. With a round dog in your bench skirt and another in a hole drilled in your end vise, you can secure work to the front of the skirt for side clamping without fumbling for clamps. Make the holes not deeper than 45mm, to remove the pups without problems.
	Use a predrilled block to ensure 90° holes. The dog hole spacing is of your choise.
	2° inclined face pulls work down to the bench surface.
	Top and side clamping with bench dog and vise.
	Top and side clamping with bench dogs and Wonder Dog clamps