Fret saw frame PEBARO Automatic
This fret saw has the best and easiest system we have seen to change and tension the blades.
And even better, the system actually works -- unlike a lot of other fret saws we have seen.
Instructions
1. The two levers are turned, about one full revolution, to release the blade.
2. The handle folds down 90 degrees to release the tension on the blade. Insert the new blade into the slot by the handle, and retighten the locking lever.
3. Tuck the other end of the blade into the other arm, and turn the second lever to clamp it in place.
4. Then pivot the handle back into its original position to tension the blade, and you can begin to saw.
Sometimes, when tightened down, the levers will interfere with the work. Pull straight out on the levers. This disengages the handle from the clamp mechanism, and they can be adjusted to leave the work area free.
Price